18 00 Exhaust Assembly
EXHAUST ASSEMBLY - TIGHTENING TORQUES - (1AZ - 11AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Clamp for final muffler | All | M8 | 15 N.m. | |
| 2AZ Exhaust system to exhaust manifold | W10 / W11 | M10 | Replace nuts Coat threads with copper paste | 60 N.m. |
| 3AZ Reinforcing panel to body | W10 / W11 | 14 N.m. | ||
| 4AZ Rubber mount to reinforcing panel | W10 | M6 | 9 N.m. | |
| 5AZ Vibration damper on bracket | W10 | 21 N.m. | ||
| 6AZ Holder/vibration damper to exhaust | W10 | 21 N.m. | ||
| 7AZ Exhaust mounting brackets to body | W11 | 14 N.m. | ||
| 8AZ Cover/rear muffler | W10 / W11 | 2.5 N.m. | ||
| 9AZ Exhaust system to primary catalytic converter | W17 | 43 N.m. | ||
| 10AZ Primary catalytic converter to exhaust turbocharger | W17 | Replace nuts Coat threads with copper paste | 26 N.m. | |
| 11AZ Holder to primary catalytic converter | W17 | 37 N.m. |