51 13 375 Removing and installing/replacing trim on left or right rear roof pillar (C-pillar)

Release screws (1) and remove trim (2).

Tightening torque 51 13 4AZ. 

Fig 1: Identifying Screws And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Clamping strips (1) must not be damaged.

Fig 2: Identifying Strips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure side window (1) is correctly seated in clamping strips (2).

Observe gap.

Fig 3: Identifying Side Window And Strips

Courtesy of BMW OF NORTH AMERICA, INC.