65 11 030 Removing and installing/replacing radio receiver (built-in unit)

Necessary Preliminary Tasks: 

• Remove cover strips for front center console. Refer to 51 16 198 REMOVING/INSTALLING OR REPLACING TRIM BETWEEN FRONT CENTER CONSOLE AND INSTRUMENT PANEL .

Release screws (1) and pull radio receiver back.

Fig 1: Locating Radio Receiver Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove holder (1) for radio wiring harness.

Unfasten plug connection (2) and disconnect.

Disconnect antenna plug (3) and remove radio receiver.

Fig 2: Removing Radio Receiver

Courtesy of BMW OF NORTH AMERICA, INC.