64 11 939 Replacing temperature sensor for heater (IHKA)
WARNING: This page is about a different variant/trim than selected.
Necessary Preliminary Tasks:
- Remove heater controls. Refer to 64 11 333 REMOVING AND INSTALLING/REPLACING HEATER CONTROLS (IHR AND IHKR) AND/OR 64 11 334 REMOVING AND INSTALLING/REPLACING HEATER CONTROLS (IHKA) .
Turn temperature sensor for heater (1) clockwise (approx. 45°) and pull out.
Unfasten plug connection (2) and disconnect.
Installation:
Make sure that opening (3) of temperature sensor for heater is correctly aligned.