63 31 020 Removing and installing/replacing footwell light (splitdoor)

Special tools required: 

• 64 1 020  . See Fig 1.

Lever footwell light frame (1) with special tool 64 1 020  in direction of arrow out of door trim panel (2).

Fig 1: Removing Footwell Light Frame With Special Tool 64 1 020

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unclip footwell light (2) in direction of arrow from footwell light frame (3) and remove towards rear.

Replacement: 

If necessary, remove bulb. 

Fig 2: Uncliping Footwell Light

Courtesy of BMW OF NORTH AMERICA, INC.