63 21 180 Removing and installing/replacing left or right rear light

Special tools required:

Release screw (1). Tightening torque 63 21 2AZ .

Unlock fixture (2) with special tool 64 1 020 in direction of arrow.

Remove rear light (3) towards top.

Fig 1: Unlocking Fixture With Special Tool 64 1 020

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove bulb holder for rear light (2).

Fig 2: Identifying Plug Connection And Rear Light

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure sealing frame for rear light (1) is correctly seated on rear light (2)
Make guides (4) are correctly seated
Make sure fixture (3) engages correctly

Fig 3: Identifying Sealing Frame For Rear Light, Guides And Fixture

Courtesy of BMW OF NORTH AMERICA, INC.