00 8 000 Hydraulic Puller Tool

WARNING: This page is about a different variant/trim than selected.

In conjunction with: With all previous removal/installation tools for rubber mounts.

Note: For removing and installing rubber mount in rear axle carrier.

Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, R50, R52, R53, RR1.

Fig 1: Identifying 00 8 000 Hydraulic Puller Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Storage location: Single.

SI number: 1 02 99(417).

Order number: 00 8 000 .

Hydraulic puller tool.

Consisting of:

= 00 8 001 Hydraulic pump.
= 00 8 002 Hydraulic hose.
= 00 8 003 Hydraulic cylinder.
00 8 004 Threaded spindle.

Note: M14 x 520.

00 8 005 Threaded spindle.

Note: M12 x 496.

00 8 006 Threaded spindle (optional).

Note: M14 x 465.

00 8 007 Nut M18.

00 8 008 Securing line.

00 8 009 Spindle with nut.