13 62 Senders for Control Unit
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SPECIFICATION - SENDERS FOR CONTROL UNIT
| Type | Measure | |
|---|---|---|
| 1AZ Temperature time switch | M21 / M51 | 18 Nm |
| 2AZ Coolant temperature sensor | M60/1 / M60/2 / M21 / M51 | 18 Nm |
| All others | 13 Nm | |
| 3AZ Temperature switch | All | 28 Nm |
| 4AZ Temperature sensor - air | All | 13 Nm |
| 5AZ Charge-air pressure sensor on holder | M51 / M41 | 4 Nm |
| Charge-air pressure sensor on intake manifold | M47 | 5 Nm |
| 6AZ Twin temperature sensor (4-pin plug-in connection) | M41 / M43 / M44 / S50 / S52 / M52 / M57 / M67 / M62 / M73 | 13 Nm |
| 7AZ Air-mass sensor on lower section of air filter housing | M51 | 3.5 Nm |
| Air-mass flow sensor to cylinder head cover | M47 / M47TU / M57 / M57TU | 4.5 Nm |
| 8AZ Pulse generator, camshaft to cylinder head cover | M57 | 4.5 Nm |
| M47TU / M57TU | 3.5 Nm | |
| 9AZ Intake neck on air-mass flow sensor | M47 | 9 Nm |