11 21 Crankshaft and Bearings (N52)

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2008 BMW Z4, 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, and 2007 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

CRANKSHAFT AND BEARINGS TIGHTENING SPECIFICATION

	Type	Thread	Tightening specification	Measure
1AZ Torsion damper (hub) to crankshaft (central bolt 12.9)	N52	M16x80	Replace screws Lightly oil screws and threads
			Jointing torque	100 Nm
			Torque angle	360 °