51 11 Front bumper
WARNING: This page is about a different variant/trim than selected.
FRONT BUMPER - TIGHTENING TORQUES - (1AZ - 6AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Spoiler, front bumper, bottom, to front end module | R50 / R52 / R53 | M6 x 16 | 6 N.m. | |
| 2AZ Front bumper to MFE | R50 / R52 / R53 | M6 x 16 | 5 N.m. | |
| 3AZ Front bumper carrier to body (nuts) | R50 / R52 / R53 | M8 | 22 N.m. | |
| 4AZ Front bumper carrier to suspension carrier extensions | R50 / R52 / R53 | M8 x 30 | 22 N.m. | |
| 5AZ Bumper adjustment apparatus to MFE | R50 / R52 / R53 | M6 x 20 | 6 N.m. | |
| 6AZ Bumper adjustment apparatus to bumper | R50 / R52 / R53 | M6 x 20 | 6 N.m. |