51 11 Front Bumper
WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
FRONT BUMPER BOLTS SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Spoiler, bumper, lower, to front panel | R50, R52, R53 | M6 | 6 Nm | |
| 2AZ Bumper to front panel | R50, R52, R53 | M6 | 6 Nm | |
| 3AZ Carrier to body | R50, R52, R53, R55, R56 | M8 | Nut | 22 Nm |
| 4AZ Carrier to bracket, bumper, front | R50, R52, R53 | M8 x 30 | Screw | 22 Nm |
| R55, R56 | M8 | 18.5 Nm | ||
| 5AZ Adjusting fixture to front panel | R50, R52, R53 | M6 x 20 | 6 Nm | |
| 6AZ Adjusting device to bumper | R50, R52, R53 | M6 x 20 | 6 Nm | |
| 7AZ Lock bridge to body | R55, R56 | 22 Nm |