51 13 102 Removing and installing/replacing trim on front left or right wheel arch

WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

If necessary, release clip on wheel arch trim (1).

Bend wheel arch trim (1) inwards slightly and release clip (2).

Installation:

If necessary, replace faulty clip (2).

Fig 1: Identifying Clip And Arch Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Feed trim (1) in area (A) towards front out of bumper.

Release trim (1) from clips (2); if necessary, disconnect associated plug connection and remove.

Installation:

If necessary, replace faulty clips (2).

Fig 2: Releasing Trim From Clips

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing with USA national version:

Remove side marker lamp. See CLEARANCE AND SIDE MARKER .