61 31 996 Carry out steering angle sensor adjustment
WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Steering angle sensor adjustment must be carried out:
- after adjustment work on the front axle/steering
- after all mechanical work on the steering system
- after replacement / coding / programming of the following components:
- Steering column switch cluster
- Dynamic Stability Control (DSC) control unit
Connect vehicle to BMW diagnosis system.
Select and carry out steering angle sensor adjustment under Service functions.