31 11 020 Removing and installing/replacing bumper bracket

WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove SUPPORT FOR BUMPER TRIM

Undo bolt (1) at front panel strut.

Fig 1: Identifying Bolt At Front Panel Strut

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Pull off bumper bracket forwards from front axle support.

Installation note:

Tightening torque 31 11 3AZ

Fig 2: Removing Bumper Bracket

Courtesy of BMW OF NORTH AMERICA, INC.