11 00 050 Removing and installing engine (N14)
Special tools required:
- 11 0 260
Necessary preliminary tasks:
- Remove EXHAUST SYSTEM .
- Drain ENGINE OIL .
- Disconnect NEGATIVE BATTERY LEAD .
- Remove both output shafts. See OUTPUT SHAFT .
- Remove INTAKE FILTER HOUSING .
- Detach all coolant hoses from engine.
- Detach vacuum line from brake booster.
- Unfasten engine wiring harness and lay to one side.
- Remove complete front panel. See FRONT TRIM PANEL .
Attach special tool 11 0 260 to lifting eye (1) on engine.
NOTE:
Pictures show N12.
Attach special tool 11 0 260 to lifting eye (1) at transmission end.
NOTE:
Pictures show N12.
Remove engine with special tool 11 0 260 towards front.
NOTE:
Pictures show N12.
Assemble engine.
Check function of DME.