11 31 051 Replacing timing chain (N14)

Special tools required:

00 9 120
11 9 280
11 9 550
11 9 590

IMPORTANT: Modified procedure for timing adjustment.
The timing is not determined at firing TDC of cylinder no. 1.
All pistons are in the 90° position.

Necessary preliminary tasks:

Remove cylinder head cover .
Remove all spark plugs .
Remove vibration damper .
Remove chain tensioner .
Remove VANOS adjustment unit .
Remove sprocket wheel for exhaust camshaft .
Remove PTFE ring at front.
Remove belt tensioner .

Position crankshaft with special tool 11 9 590.

Do not remove special tool 11 9 590 during repair work.

Fig 1: Identifying Special Tool (11 9 590)

Courtesy of BMW OF NORTH AMERICA, INC.

Do not remove special tool 11 9 550.

Fig 2: Mounting Special Tool (11 9 522) On Cylinder Head

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Employ a second person for gripping when releasing central bolt (1).

Fit special tool 11 9 280 on hub for vibration damper with screws (2).

Release central bolt (1).

Fig 3: Fitting Special Tool (11 9 280) On Hub For Vibration Damper With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release central bolt in direction of arrow.

Tightening torque 11 21 1AZ

Fig 4: Releasing Central Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Release bearing pins (1 and 2).

Tightening torque 11 31 6AZ

Fig 5: Identifying Bearing Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Remove hub (3) towards front.

Remove chain module with timing chain.

Using a hook (2), pull oil pump chain (1) upwards.

Fig 6: Removing Hub

Courtesy of BMW OF NORTH AMERICA, INC.

Sprocket wheel (1) of timing chain.

Sprocket wheel (2) of oil pump.

Fig 7: Identifying Sprocket Wheel Of Timing Chain And Oil Pump

Courtesy of BMW OF NORTH AMERICA, INC.

Secure chain module (1) with rubber (3) to facilitate assembly.

Pull timing chain (2) upwards until sprocket wheel (4) rests against chain guide (1).

Install timing chain (2) and sprocket wheel (4) in this position.

Installation:

Always keep timing chain (2) tensioned; it is possible for timing chain (2) to jam on chain module (1).

Fig 8: Identifying Chain Guide, Timing Chain, Rubber And Sprocket Wheel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation position of both sprocket wheels.

Sprocket wheel (1) of oil pump.

Guide rail (2) of timing chain.

Hub (3) on crankshaft.

Sprocket wheel (4) of timing chain.

Fig 9: Identifying Oil Pump Sprocket Wheel, Guide Rail, Hub And Sprocket Wheel

Courtesy of BMW OF NORTH AMERICA, INC.

Attach oil pump sprocket wheel (2) in direction of arrow to crankshaft (1).

Insert chain module with timing chain and secure.

Attach crankshaft hub.

Screw in central bolt.

Fig 10: Attaching Oil Pump Sprocket Wheel To Crankshaft

Courtesy of BMW OF NORTH AMERICA, INC.

Remove special tool 11 9 280 from hub.

Secure central bolt with special tool 00 9 120.

Fig 11: Identifying Special Tool (00 9 120) And (11 9 280)

Courtesy of BMW OF NORTH AMERICA, INC.

Install VANOS adjustment unit

Install sprocket wheel for exhaust camshaft.

Crank engine twice.

Check timing .

Install PTFE ring .

Assemble engine.