11 00 039 Checking compression of all cylinders (N14)

IMPORTANT: High tension - mortal danger!
Interrupt power supply to ignition coils.
Read and comply with notes on compression pressure check.

Necessary preliminary tasks:

Unscrew tip (1) from special tool 11 0 222.

IMPORTANT: Then check the Schrader valve that is now visible for secure seating.

Fig 1: Identifying Special Tool 11 0 222 With Tip

Courtesy of BMW OF NORTH AMERICA, INC.

Prepare special tool 11 0 222 in conjunction with 11 8 732 and 11 8 731.

Fig 2: Prepare Special Tool 11 0 222 With 11 8 732 And 11 8 731

Courtesy of BMW OF NORTH AMERICA, INC.

Screw special tool 11 0 222 onto special tool 11 8 731 to 10 Nm.

Fig 3: Screw Special Tool (11 0 222) Onto Special Tool (11 8 731)

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Do not forget to oil spark plug thread of special tool 11 8 731.

Screw special tool 11 0 222 by hand into spark plug thread and connect special tool 11 0 224.

Use adapter lead (1) if the compression pressure is being checked with the BMW diagnosis system.

Depress accelerator pedal and actuate starter until compression pressure stops rising.

Fig 4: Identifying Adapter Lead And Special Tool (11 0 222)

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine

Now clear the fault memory.