34 6 300 Brake piston tool

Minimum set: Mechanical tools 

Note: For turning back brake piston when fitting new brake pads, disc brakes front and rear.

Series: R50, R53.

SI number: 1 05 01 (718).

Order number: 34 6 300 .

Brake piston tool.

Consisting of:

1. = 34 6 301 Pin wrench.

   Note: For rotating piston.

2. = 34 6 302 Thrust sleeve.

   Note: For fitting rubber sleeve (dia. 63).

3. = 34 6 303 Thrust sleeve.

   Note: For fitting rubber sleeve (dia. 54).

4. = 34 6 304 Thrust sleeve.

   Note: For pressing piston back.

5. = 34 6 305 Screw.

   Note: For pressing piston back.

6. = 34 6 306 Nut.
7. = 34 6 307 Plate.
8. = 34 6 308 Spindle (M18x2.5).

Fig 1: Identifying 34 6 300 Brake Piston Tool

Courtesy of BMW OF NORTH AMERICA, INC.