13 71 030 Removing and installing/replacing both intake silencer housings (N63 B40/B44 O 0/1)
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Switch off ignition.
- Remove ACOUSTIC COVER
NOTE:
Description for intake silencer housing. Procedure for the right side is identical.
Release clamps (1).
Tightening torque 13 62 9AZ .
Unfasten connector (2) on hot film air mass meter and disconnect.
Release clamp (3).
Unclip the oxygen sensor cable from the intake filter housing.
Detach intake air filter housing from intake port, pull off upwards and remove.