32 00 601 Adjusting toe-in on front axle
WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If wheel camber is not in the setpoint value range, it is necessary to carry out troubleshooting.
Adjusting toe: Move wheels and steering gear to straight-ahead position.
Release screw (1).
Adjust toe-in to specified value by turning tie rod at hexagon (2).
Installation:
Make sure that gaiter (3) of tie rod does not turn as well.
Installation:
Tightening torque 32 21 2AZ. .