31 60 Input shaft
WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATION - INPUT SHAFT
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Output shaft bearing to engine block |
R55, R56 |
M10 |
|
38 Nm |
| 2AZ Output shaft to angular-contact ball bearing |
R55, R56 |
M22 |
Replacing collar nut, lightly oil contact face |
182 Nm |