21 21 Clutch plate and drive plate
WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATION - CLUTCH PLATE AND DRIVE PLATE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Clutch to flywheel | R50 | M7 | Insert NEW screws | 20 Nm |
| 2AZ Clutch to flywheel | R53 | M8 | Insert NEW screws | 23 Nm |
| 3AZ Clutch to flywheel | R53 | M9 | Insert NEW screws | 28 Nm |
| 4AZ Clutch to flywheel | R56/R55 | M8 | Insert NEW screws | 28 Nm |
| R55/R56 COOPER D (W16) | M8 | Use new screws | 20 Nm |