21 52 Clutch control (hydraulic)
WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATION - CLUTCH CONTROL (HYDRAULIC)
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Clutch slave cylinder to bracket |
R50/R53 |
M8 |
|
24 Nm |
| 2AZ Clutch slave cylinder to transmission housing |
R55/R56 |
M8 |
|
21 Nm |
| 3AZ Clutch master cylinder to pedals |
R55/R56 |
M6 |
|
9 Nm |