LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2007 >> Cooper S, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1828 (Body Equipment - Repair - Clubman (R55)) >> Floor, Luggage Compartment, Engine Compartment Trim Panels >> 51 47 490 Removing and installing/replacing front assembly underbody protection

51 47 490 Removing and installing/replacing front assembly underbody protection

WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1). Pull forward underbody protection (2) under bumper trim and remove. Installation note:  Centre underbody protection and tighten down screws.

Fig 1: Identifying Underbody Protection With Screws (R56 COOPER D Shown; Others Are Similar)
G06916416Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals