LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2007 >> Cooper S, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1826 (Body - Repair - Clubman (R55)) >> Body, General >> 41 00... Gap dimensions, body

41 00... Gap dimensions, body

WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The dimensions specified in this service information are applicable at an object temperature of 20°C. The aim of adjustment is to achieve a uniform gap.
Symmetry of the gaps between left and right sides of the vehicle has top priority.
The door gaps must not deviate between the front and rear gap by more than 1.0 mm.
No gap dimension are specified for components which cannot be adjusted.

Dimensions in mm 

Fig 1: Identifying Body Gap Dimensions (1 Of 5)
G05516537Courtesy of BMW OF NORTH AMERICA, INC.

Dimensions in mm 

Fig 2: Identifying Body Gap Dimensions (2 Of 5)
G05516538Courtesy of BMW OF NORTH AMERICA, INC.

Dimensions in mm 

Fig 3: Identifying Body Gap Dimensions (3 Of 5)
G05516539Courtesy of BMW OF NORTH AMERICA, INC.

Dimensions in mm 

Fig 4: Identifying Body Gap Dimensions (4 Of 5)
G05516540Courtesy of BMW OF NORTH AMERICA, INC.
Fig 5: Identifying Body Gap Dimensions (5 Of 5)
G05516541Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals