11 00 050 Removing and installing engine (N14)
- 11 0 260
Necessary preliminary tasks:
- Remove Exhaust System .
- Drain Engine Oil .
- Disconnect negative battery lead.
- Remove both Left and Right output shafts .
- Remove Air Cleaner Housing .
- Detach all coolant hoses from engine.
- Detach vacuum line from brake booster.
- Unfasten Engine Wiring Harness and lay to one side.
- Remove complete Front Panel
Attach special tool 11 0 260 to lifting eye (1) on engine.
NOTE:
Pictures show N12.
Attach special tool 11 0 260 to lifting eye (1) at transmission end.
NOTE:
Pictures show N12.
Remove engine with special tool 11 0 260 towards front.
NOTE:
Pictures show N12.
Assemble engine.
Check function of DME.