11 21 Crankshaft and Bearings
CRANKSHAFT AND BEARINGS TIGHTENING TORQUES SPECIFICATION
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Torsion damper (hub) to crankshaft (central bolt) |
N14 |
M14 x1.5 x74 |
Replace screws
Lightly oil screws and threads |
|
| |
|
|
Jointing torque |
50 Nm |
| |
|
|
Torque angle |
100 ° |