62 10 125 Removing and installing complete instrument panel

Necessary preliminary tasks: 

• Disconnect BATTERY NEGATIVE LEAD
• Remove COVER FOR INSTRUMENTS
• Remove KNEE PROTECTION, FRONT PASSENGER SIDE
• Remove KNEE PROTECTION, DRIVER'S SIDE

Release screw (1).

Fig 1: Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Pull back complete instrument cluster (2) slightly.

Disconnect plug connections and remove instrument cluster (2).

Fig 2: Screws And Instrument Cluster

Courtesy of BMW OF NORTH AMERICA, INC.