63 12 010 Removing And Installing/Replacing Left Headlight (Xenon Headlight)

WARNING: Version with xenon headlight: Danger to life due to high voltage! Therefore, before removing, disconnect all components from the power supply (lighting system and ignition off).
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Release screws (1).

Disconnect plug connection (2).

Pull headlight forwards slightly and detach hose connection (3) from high-pressure nozzle (4).

Remove headlight.

Fig 1: Identifying Screws And High-Pressure Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Adjust Gap Dimensions by means of adjusting screws (1)

Fig 2: Gap Dimensions
Courtesy of BMW OF NORTH AMERICA, INC.
Adjust HEADLIGHTS

Fig 3: Identifying Adjusting Screws
Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Modify XENON BULB FOR HEADLIGHT
Modify BULB FOR TURN INDICATOR
Modify control unit for xenon headlights. See REPLACING CONTROL UNIT FOR LEFT XENON HEADLIGHT or CONTROL UNIT FOR RIGHT XENON HEADLIGHT .
Modify HIGH-PRESSURE NOZZLE of headlight washer system
Modify adjusting screws