36 11 521 Removing and installing/replacing RPA control unit (cars up to 03/02)

Necessary Preliminary Tasks: 

• Remove right rear light. Refer to 63 21 180 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT REAR LIGHT .

Release screws (1) and remove bracket (2) with control unit.

Fig 1: Locating RPA Control Unit Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connector (1).

Release nuts (2) and remove control unit from bracket.

Fig 2: View Of RPA Control Unit Plug Connector

Courtesy of BMW OF NORTH AMERICA, INC.