63 10 004 Adjusting headlights
NOTE:
For Special Tool identification, see LIGHTS - SPECIAL TOOLS - COOPER (1.6L) R50/W1 .
Special Tools Required:
- 63 2 100
NOTE:
Comply with test preconditions for headlight adjustment. Refer to 63 10 ... TEST REQUIREMENTS FOR HEADLIGHT VERTICAL AIM ADJUSTMENT .
NOTE:
Illustrations show the right headlight.
Adjust headlights at adjusting screws (1) and (2).
- Adjusting screw for vertical aiming.
- Adjusting screw for lateral aiming.
Open hood/bonnet.
Attach special tool 63 2 100 to adjusting screw (1).
Lock special tool 63 2 100 by pushing in direction of arrow on adjusting screw (1).
Close hood/bonnet and make sure special tool 63 2 100 is correctly laid between hood/bonnet and wheel arch trim (3).
Adjust headlight by turning special tool 63 2 100.
NOTE:
Secure knurled wheel (1) when turning special tool 63 2 100.
- Vertical adjustment:
- Clockwise = higher.
- Counterclockwise = lower.
- Lateral adjustment:
- Clockwise = to right.
- Counterclockwise = to left.