11 12 264 Replacing seals for spark plug well
Special tools required:
- 24 1 040
Necessary preliminary tasks:
- Remove cylinder head cover. Refer to 11 12 000 Removing and installing, sealing cylinder head cover (COOPER S) .
Use a suitable tool to carefully remove spark plug seals (1).
Clean all sealing surfaces.
Installation note:
Fit seals (1) with special tool 24 1 040.
Only use hand force to press in seals (1).
Lightly oil seals before installing cylinder head cover.
NOTE:
Ensure that the sealing surfaces of cylinder head cover are not damaged.
Replace seals if they show signs of hardening and cracking.
Assemble engine.