LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2006 >> Cooper S, 2D Hatchback, Automatic >> Repair and Diagnosis >> General Information >> OEM General Information >> Maintenance And General Information - Repair Instructions - Cooper (R50) , Cooper S (R53) & Convertible (R52) >> Maintenance & General Information >> 00 .. ... Lifting vehicle with a lifting platform

00 .. ... Lifting vehicle with a lifting platform

NOTE: Before driving onto a lifting platform, make sure there is sufficient ground clearance between the lifting platform and the car. The lifting platform must comply with the relevant statutory accident prevention regulations and be serviced according to the manufacturer's instructions.

Lifting platform securing points (1) must be fitted to the vehicle.

If necessary, remove these securing points (1) from the equipment pack and clip into bores in front and rear spoiler area from below.

Make sure that the locating plate (2) of the lifting platform arm does not touch (and thereby damage) adjoining components.

Fig 1: Identifying Lifting Platform Securing Point
G03306007Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: The vehicle may only be raised at the four reinforced supports!
NOTE: Follow the lifting gear operating instructions. In particular, follow the safety instructions and observe the carrying capacity of the lifting gear.