17 51 090 Removing and installing or replacing turbocharger inlet pipe
Special tools required:
- 11 8 401
- 11 8 402
Remove impact tube. Refer to 31 11 020 Removing and installing/replacing bumper bracket .
Lower front end module and attach special tools 11 8 401 and 11 8 402.
Remove pipe from intercooler to intake manifold. Refer to 17 51 085 Removing and installing/replacing pipe between intercooler and intake manifold (left) .
Remove retaining bolt (1) for turbocharger inlet.
Detach turbocharger inlet pipe (2) from feed lines (3).
NOTE:
Release pipes at quick -release couplings.
Tightening torque 11 65 1AZ. Refer to ENGINE - TIGHTENING TORQUES .
Check sealing ring (1) for damage.
NOTE:
Guide lug (2).
Replace sealing ring if damaged.