34 32 881 Replacing front left or right brake hoses

NOTE: General Information, refer to 34 00 ... GENERAL INFORMATION . After completing tasks, bleed brake system. Refer to 34 00 048 BLEEDING BRAKE SYSTEM WITH ABS/ASC+T .

Apply pedal prop and depress brake pedal slightly. This prevents brake fluid from emerging from the expansion tank when the brake lines are opened.

Fig 1: Securing Brake Pedal Using Pedal Prop

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect brake hose (1) from brake line.

IMPORTANT: Grip brake hose (1) at hexagon to prevent connecting piece from turning in retaining bracket.

Installation:

Tightening torque, (14 N.m.).

Fig 2: Identifying Brake Hose And Brake Line

Courtesy of BMW OF NORTH AMERICA, INC.

Pull brake hose out of retaining fixture on shock absorber.

Fig 3: Removing Brake Hose From Retaining Fixture On Shock Absorber

Courtesy of BMW OF NORTH AMERICA, INC.

Release banjo bolt (2) and detach brake hose (1) from brake caliper.

Installation:

Tightening torque, (40 N.m.).

Replace sealing rings.

Mount and tighten brake hose on brake caliper first, then on brake line/brake hose point of connection.

IMPORTANT: Never twist brake hose when installing it and avoid all contact with parts attached rigidly to the body.

Fig 4: View Of Banjo Bolt And Brake Hose

Courtesy of BMW OF NORTH AMERICA, INC.