63 99 307 Replacing bulb for reversing light (up to 07/2004)
WARNING:
Follow instructions for handling light bulbs (exterior lights). Refer to 63 99 ... INSTRUCTIONS FOR HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
Release retaining clip (1) from reversing light (3) behind bumper.
Detach reversing light (3) from bumper trim.
Turn bulb holder (2) of reversing light (3) counterclockwise and remove.
Remove bulb for reversing light (4).
Installation:
Make sure sealing ring (5) is correctly seated in bulb holder (2).
Note type of bulb. Refer to LIGHTS - TECHNICAL DATA - COOPER (1.6L) R50/W10 .