00 2 480 Measurement Stand With Clamp

Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57TU, M60, M62, M62VAN, M67, M70, M73, M88, N40, N42, N62, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, W10, W11, W17.

SI number: 1 18 99(489).

Order number: 00 2 480  .

Fig 1: Identifying 00 2 480 Measurement Stand With Clamp

Courtesy of BMW OF NORTH AMERICA, INC.

Measurement stand with clamp.

Consisting of:

1. = 00 2 481 Clamping foot.
2. = 00 2 482 Clamping piece.
3. = 00 2 483 Shaft.
4. = 00 2 484 Shaft.