22 11 Engine Suspension
ENGINE SUSPENSION - TIGHTENING TORQUES - (1AZ - 11AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Engine support bracket to engine mount | R50 / R52 / R53 | M12x1.5 - 8 | 68 N.m. | |
| 2AZ Engine support bracket to engine / adapter plate | R50 / R52 / R53 | M12x93 - 8.8 | 66 N.m. | |
| R50 / R52 / R53 | M12x1.75x85 | 66 N.m. | ||
| 3AZ Engine carrier bracket mount to body | R50 / R53 | M12x1.5x30 - 8.8 | 68 N.m. | |
| 4AZ Top engine carrier bracket to engine support bracket | R50, W10 / R53 | M12x1.5x60 - 8.8 | 100 N.m. | |
| R50 / W17 | M12x1.5x70 - 8.8 | 68 N.m. | ||
| 5AZ Top engine carrier bracket to engine carrier bracket holder | R50, W10 / R53, | M12x1.5x90 - 10.9 | 100 N.m. | |
| R50 / W17 | M12x1.5x100 - 8.8 | 68 N.m. | ||
| 6AZ Engine mount to body | R50 / R52 / R53 | M10x110 - 10.9 | Replace screw | |
| Jointing torque | 56 N.m. | |||
| Torque angle | 90° +/- 15° | |||
| R50 / R52 / R53 | M12x35-8.8 | 68 N.m. | ||
| 7AZ Bottom engine carrier bracket holder to oil sump | R50 / R52 / R53 | M10x20 - 8.8 | 38 N.m. | |
| 8AZ Bottom engine carrier bracket to holder | R50 / R52 / R53 | M12x1.5x60 - 10.9 | 100 N.m. | |
| 9AZ Bottom engine carrier bracket to front axle carrier | R50 / R52 / R53 | M12x1.5x90 - 10.9 | 100 N.m. | |
| 10AZ Adapter plate to end cover | R50 / W17 | M8x50, M8x65 | 24 +/- 5 N.m. | |
| R50 / W17 | M10x55 | 55 +/- 5 N.m. | ||
| 11AZ Grounding cable to engine support bracket | R50 / R52 / R53 | M8 nut | 13.5 N.m. |