51 11 507 Adjusting front bumper laterally

Turn road wheel to expose bumper adjusting bracket.

Check gap dimensions/bumper fitting.

Release screw (1) to facilitate vertical adjustment of bumper.

Tightening torque, refer to 51 11 5AZ in BODY EQUIPMENT - TIGHTENING TORQUES - COOPER (1.6L) R50/W10 .

Release screw (2) to facilitate lateral adjustment of bumper.

Tightening torque, refer to 51 11 6AZ in BODY EQUIPMENT - TIGHTENING TORQUES - COOPER (1.6L) R50/W10 .

Fig 1: Locating Bumper Adjustment Screws

Courtesy of BMW OF NORTH AMERICA, INC.