22 11 040 Replacing upper engine carrier bracket

Unclip lines (3) and (4) from holder.

Release screws (1).

Tightening torque, refer to 22 11 4AZ / 5AZ in ENGINE AND GEARBOX SUSPENSION .

Fig 1: View Of Lines In Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Release bolts (1) and remove engine carrier bracket (2).

Tightening torque 22 11 4AZ/ 5AZ in ENGINE AND GEARBOX SUSPENSION - TIGHTENING TORQUES .

Fig 2: Identifying Engine Carrier Bracket Retaining Bolts

Courtesy of BMW OF NORTH AMERICA, INC.