17 00 039 Bleeding cooling system and checking for water leaks
WARNING:
Danger of scalding - only remove cover when engine has cooled down.
Checking coolant level
Allow engine to cool down before checking coolant level.
Coolant temperature must not be more than 30 °C.
If ambient temperature exceeds 30°C, wait until engine has cooled down to ambient temperature.
Use only recommended coolant, refer to BMW Operating Fluids .
Check coolant level and top up if necessary.
- Add coolant, refer to 17 00 005 Draining and adding coolant (COOPER S)
- Checking cooling system for water leaks, refer to 17 00 009 Checking cooling system for leaks (W11)