LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2003 >> Cooper Base, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Body Equipment - Repair - Cooper (R50) , Cooper S (R53) & Convertible (R52) >> Trunk Latch, Locks >> 51 24 130 Removing and installing/replacing striker for rear lid lock

51 24 130 Removing and installing/replacing striker for rear lid lock

Open tailgate.

Remove trim panel. Refer to 51 49 005 REMOVING AND INSTALLING/REPLACING TRIM FOR LOWER TRUNK LID (TAILGATE) .

Remove Torx screws (1) securing striker.

Tightening torque, refer to 51 24 2AZ in BODY EQUIPMENT - TIGHTENING TORQUES - COOPER (1.6L) R50/W10 .

Remove striker (2).

Fig 1: Removing Torx Screws Securing Striker
G03306703Courtesy of BMW OF NORTH AMERICA, INC.