Tail Lights

The tail lamp assemblies are secured to the body by two clips on the outer side and stud and nut on the inner side of the tail lamp assembly. Replacement of the tail lamp bulbs is possible through access provided in the rear quarter trim panels. Removal of the tail lamps is achieved by releasing the clips and removal of the nut through the same access panels.

Fig 1: Tail Lights Assembly

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Back View Of Tail Lights Assembly

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 3: Taillight Assembly (From MY 2005 )

Courtesy of BMW OF NORTH AMERICA, INC.