51 49 005 Removing and installing/replacing trim for lower trunk lid (tailgate)

Release screws (1).

Release trim for rear lid from clips (2) and remove.

Installation: 

If necessary, detach clips (2) from rear lid and attach to trim for rear lid.

If necessary, replace defective clips.

Secure clips (2) with body adhesive tape to trim for rear lid so that they cannot move during fitting.

Fig 1: Identifying Clips From Tailgate

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Remove stops for rear parcel shelf.

Fig 2: Locating Parcel Shelf Stops

Courtesy of BMW OF NORTH AMERICA, INC.