51 41 018 Replacing speaker trim on front left or right door trim panel

IMPORTANT: Make sure the door trim panel is not damaged when the plastic weld joints are cut.

Remove and dispose of foam seal (1).

Cut plastic weld joints (2).

Pull speaker trim (3) out of door trim panel (4).

Fig 1: Identifying Foam Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Install new speaker frame (1).

Press retaining rings (2) onto plastic pins (3).

Shorten all plastic pins (3) to measurement (4).

4. 1.5 mm.

Fig 2: Identifying Measurements Of Plastic Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure the retaining rings are correctly seated on the plastic pins.

Make sure the foam seal is correctly located to avoid speaker crackling.