61 67 045 Removing and installing/replacing spray nozzles for left or right headlight cleaning system

NOTE:

Special Tools Required:

Pull nozzle carrier (1) out of headlight cleaning system (2) and secure with special tool 00 9 341.

Fig 1: View Of Nozzle Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully lift off chrome cover (1) from trim (2) with screwdriver (3).

Fig 2: Identifying Chrome Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully press retaining lugs (1) together with pointed pliers (2) and remove trim (3).

Fig 3: Locating Retaining Lugs On Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Remove special tool 00 9 341.

Release hose connection piece (1) by pressing release tongue (2) on headlight washer system (4).

Release fastening tongue (3), slide headlight cleaning system (4) in direction of arrow and remove.

Fig 4: View Of Hose Connection Piece

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of headlight cleaning system (1) must not be damaged or missing:

Fastening tongue.
Retaining lugs.

Fig 5: Identifying Headlight Cleaning System Components
Courtesy of BMW OF NORTH AMERICA, INC.

Retaining lugs (1) and (2) of chrome cover (3) must not be damaged or missing.

Installation:

Position trim (4) under individual retaining lug (1) and clip in the other two retaining lugs (2).

Fig 6: Identifying Retaining Lugs Of Chrome Cover

Courtesy of BMW OF NORTH AMERICA, INC.