LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1988 >> XR4Ti Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Wheel Bearings >> Reassembly

Wheel Bearings: Reassembly

  1. Install bearing cup using Bearing Cup Replacers (T73T-1202-B and T73T-4222-B) and Threaded Drawbar (T77F-1176-A). Lubricate seal lips and pack bearings with Lubricant (CIAZ-19590-B, C, D or E).
  2. Position inner bearing in hub. Install inner bearing seal using Seal Installer (T73T-1190-B). Install outer bearing and bearing seal using seal installer.
scientia non olet · About LEMON Manuals