LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1988 >> XR4Ti Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Master Cylinder >> Reassembly

Master Cylinder: Reassembly

  1. Install new seals on primary and secondary pistons. Install secondary piston. To prevent damage to seal lip, ease seal into master cylinder bore while slowly rotating and pushing.
  2. On all models, install primary piston. To prevent damage to seal lip, ease seal into master cylinder bore while slowly rotating and pushing. Push primary piston into master cylinder bore. Install washer (if equipped) and snap ring. Install new reservoir seals in master cylinder. Install reservoir. Install reservoir cap to prevent entry of dirt.
    Fig 1: Exploded View of Master Cylinder
    G100271Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals