LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1987 >> XR4Ti Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Testing >> Charge Indicator

Charge Indicator

  1. Turn ignition switch to "RUN" position. Indicator light should illuminate. If light does not illuminate, turn ignition off. Disconnect harness connector from "D" terminal at alternator. Ground wire against alternator housing.
  2. Turn ignition switch to "RUN" position. Indicator light should illuminate. If light does not illuminate, check bulb, wiring and printed circuit. If no problem is found, replace voltage regulator.