LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1986 >> XR4Ti Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Stabilizer Bar >> Removal

Stabilizer Bar: Removal

  1. Remove stabilizer bar attaching nuts and front washers, at each control arm. Remove "U" bracket that attaches stabilizer bar and body torque brace to body. Remove one of the control arm pivot bolts at crossmember.
  2. Pull stabilizer bar out of control arms. Remove rear washers/covers from stabilizer bar ends. Remove insulators from stabilizer bar.
scientia non olet · About LEMON Manuals